FUNCTION DISPLAY
Pure-electric, Class II heavy-duty sanitation-specific chassis.
Effective waste container capacity: 13 cubic meters.
A large, compression-type garbage vehicle specifically designed for municipal sanitation.
Cylinder-driven rear feeder cover to prevent waste spillage and odor leakage.
PRODUCT VIDEO
Technical Paramenters
| Parameter | Unit | Value |
|---|---|---|
| Dimensions (L × W × H) | mm | 9100, 8950 × 2550, 2520 × 3400, 3300 |
| Gross Vehicle Weight | kg | 18000 |
| Curb Weight | kg | 12500, 12000 |
| Rated Load | kg | 5370, 5305, 5870, 5805 |
| Front/Rear Track | mm | 1960 / 1880 |
| Front/Rear Overhang | mm | 1410 / 2840 |
| Wheelbase | mm | 4500, 5000, 5300 |
| Axle Load | kg | 6500 / 11500 |
| Minimum Ground Clearance | mm | 250 |
| Approach/Departure Angle | ° | 18 / 8 |
| Minimum Turning Diameter | m | 20 |
| Maximum Speed | km/h | 89 |
| Maximum Gradeability | % | 25 |
Click the download button,you can get all machine parameters
Chassis
Equipped with a new-generation, custom heavy-duty sanitation chassis from Dongfeng Motor, featuring high-capacity energy storage and high power, delivering long range and a robust structure.
Built-in Compaction Mechanism
Built into the bin, the dual-action compactor uses sliding and rotating elements to slash waste volume, extend collection intervals, and maximize capacity with durable, low-maintenance performance.
Loading Mechanism
A four-bar linkage driven by a tipping hydraulic cylinder, it lifts and inverts the waste bin to empty its contents into the body. During lifting, a hydraulically driven pressing plate firmly clamps the bin rim and only releases once the plastic bin has fully returned to position. This hydraulic-cylinder–driven press-plate design effectively prevents bins from dropping and eliminates the risk of injury during loading.
VEHICLE ADVANTAGES
Waste Container
The side panels are precision-bent, with critical inner surfaces made from high-quality weathering steel for exceptional ultimate strength and long service life—ideal for corrosive environments. The main body uses an integrated, sunken-arc sealed design, and the rear floor is depressed into a built-in loading hopper.
Rear Control Box
Mounted on the right side at the rear of the waste container, this operator panel houses buttons for bin lifting, bin dumping, compaction operations, feeder-cover open/close, communication, and lighting control.
Operation Modes
The vehicle is controlled via an on-board CAN-bus push-button panel, remote control, and manual rear controls. Following the work sequence, it performs fill mode, compactor lift/lower, push-shovel extension/retraction, discharge, and cleaning. Independent rear control buttons enable bucket clamping, lifting, tipping, dumping, single compaction, and continuous compaction—offering simple, safe operation.
OUR PRODUCTS ARE SOLD EVERYWHERE
